คำอธิบาย
Specifications:
- Hermetically sealed stator, anti-tracking, self-healing stator resin prevents motor burnout
- High-efficiency electrical design for lower operating cost
- Cable material according to drinking water regulations (VDE/ACS/KTW approved)
- Removable Water Bloc lead connector
- Water Lubrication and non-contaminating FES93 filling liquid
- Built In Lightning Arrestors in all 1 phase motors
- Built In Overloads on all 3 Wire 1 phase motors
- Built In BIAC starting switch on all 2 Wire 1 phase motors
Technical Specifications:
- 2 Wire motors, 1 phase: 0.37 kW to 1.1 kW
- 3 Wire motors, 1 phase: 0.75 kW to 2.2 kW
- 3 Wire PSC motors, 1 phase: 0.25 kW to 2.2 kW
- 3 Phase motors: 0.37 kW to 3.7 kW
- 3 Phase High Thrust motors: 2.2 kW to 11 kW
- 4″ NEMA flange
- Rotation 1 phase: CCW facing shaft end
- Rotation 3 phase: either CW or CCW (wiring change)
- Protection: IP68
- Insulation: Class B
- Rated ambient temperature: 30°C
- Cooling flow: min. 8 cm/sec or 0.8 m/s
- Starts per hour: max.20, equally distributed
- Installation: vertical to horizontal, shaft upwards
- 1 Phase Voltage tolerance 50 Hz: -10% / +6% at 230 V/50 Hz
- 3 Phase Voltage tolerance 50 Hz: -10% / +6% UN(380-415V = (380-10%)-(415+6%)
- 3 Phase Voltage tolerance 60 Hz: ±10%
- 1 and 3 Phase Motor protection: Select thermal overloads according to EN/DIN 61947-4-1, trip class 10 or 10A, trip time <10s at 5 x IN
- Lip seals on Super Stainless motors, 0.25 to 2.2 kW
- Mechanical seals on all 316SS motors & all High Thrust motors 2.2 kW to 11 kW
- Leads fitted: up to 1.5 kW x 1.5 meter lead
- Leads fitted: from 2.2 kW to 7.5 kW x 2.5 meter lead
- 2 Wire motors are Plug and Pump, no control box/starter is required
- Matching FE Control Box/Starters for all 3 Wire 1 phase motors
- Matching FE Control Box/Starters (SubStart SC) for all 3 Wire PSC 1 phase motors
- Motor warranty void if Franklin Electric 1 phase control box/starters not used
สามารถสอบถามรายละเอียดเพิ่มเติมได้ที่ LINE@: @9NHLPUMP (คลิกที่นี่ )